Xadow - Buzzer

Introduction

This is a Xadow module which can emit a tone. To drive it, you need to give control to two pins simultaneously: this is different from Grove - Buzzer which uses one pin to control. It is petite but loud! It can be used for making beeps, tones and alerts.

Xadow is a small but perfectly formed Arduino(TM) compatible board series containing several modules. It’s a kit extremely suitable for space-sensitive projects such as wearable devices & arts designs, which have higher request on size, weight and flexible cascade connection. You can find more modules here.

Specification

Work Voltage: 3.3V
FundamentalFrequency: 2700Hz
Sound Pressure Level: >75dB
Dimensions: 25.43mm x 20.35mm

Demonstration

There is an easy demo to show how to drive buzzer sound. If you have successfully used it, then you can apply it to your great projects, such as detecting the battery status: the buzzer will emit a sound when Xadow Main Board is in low battery.

void setup()
{
    DDRB |= 0x06;
}

void loop()
{
    //turn on the buzzer
    PORTB |= 0x06;
    delay(1);
    //turn off the buzzer
    PORTB &= ~(0x06);
    delay(1);
}

Resource

Xadow Buzzer Eagle File

Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!