Xadow Audio

Introduction


The Xadow Audio integrates a speaker box and a microphone on one single board. The speaker unit is rated at 0.7Watt with an impedance of 8 ohm. Unlike the regular cone type speakers, the loudspeaker driver used on the Xadow Audio has a flat surface and is mounted in a rectangular enclosure, which enables it to reproduce sounds at an amazing effect.

Features


  • Open source and modular design
  • Built-in enclosure for speaker
  • Combines speaker and microphone on one board
  • Built-in Xadow Connectors for easy pluggable FPC cables
  • Stackable and chain-able with other Xadow Modules
  • Perfect choice for your audio and DIY Phone projects

Specification


Speaker Box

Item Value
Resonant Frequency 900 Hz
Impedance 8 ± 20% ohms
Rated Power 0.7 W
MAX. Power 1 W
Frequency Range 900 Hz to 20 kHz

Microphone

Item Value
Microphone Sensitivity -42dBV Typ
Max Input Sound Pressure 130dB SPL

Dimensions

Item Value(mm) Value(Inch)
Speaker 13mm × 18mm × 4.5mm 0.51”× 0.71” × 0.18”
Microphone 2.95mm × 3.76mm 0.12” × 0.15”
Board 25.37mm × 20.30mm 1” × 0.8”

Hardware Overview


Make it now


Check on awesome RePhone projects that has been achieved with RePhone. A Traceable Dog Collar. By using this collar, you are able to make a phone call to your dog.

5 steps to make a traceable Dog collar for your lovely puppy.

Module Connection


Connect the Modules as instructed, please bear in mind that the unfilled corner should be facing the other side:

RePhone Community


We’ve been looking for a better place where our backers (RePhone Users) can sit together, warmly and comfortably, have conversations about RePhone, discuss technical problems, share ideas/projects, and give feedback on the modules’ development in the future. And then here we go, the RePhone Community.

Now join us in the RePhone Community! Together we seek answers, make interesting stuff, care about each other, and share our experiences.

Frequently Asked Questions

Some frequently asked questions in RePhone Community are collected and answered to the topic “Frequently Asked Questions of RePhone (FAQ)” , the topic will be kept updating whenever a new FAQ comes out.

Resources


The schematic diagram of Xadow Audio is provide in the following link:

Check more info about the Speaker box and the Microphone:

Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!