SD Card Shield
Introduction
These are SD card shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s built-in SD library. It supports SD, SDHC and Micro SD cards.
 |
|
|---|---|
| SD Card Shield V3.0 | SD Card shield V4.0 |
Here lists the comparison between various versions of SD Card Shield:
| Parameter | SD Card Shield V3.0 | SD Card Shield V4.0 |
|---|---|---|
| Operation voltage | +2.7V~+3.6V | +5V |
| Communication Protocol | SPI | SPI |
| SD Card Socket | Two Socket(SD Card Socket and Micro SD Card Socket) | a standard SD Socket(included adaptor enables using of Micro SD cards) |
| Standard Shield | No | Yes |
| Supported Card Type | SD card(<=2G); Micro SD card(<=2G); SDHC card(<=16G) | SD card(<=16G); Micro SD card(<=2G); SDHC card(<=16G) |
| Compatibility | Do not compatible with Mega | Compatible with Mega |
Help us make it better
Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!