Mini Soldering Iron
Introduction
Mini Soldering Iron is a slender, lightweight, accurate temperature-control and rapid-heating(ambient temperature to 300℃ in 10 seconds) soldering iron with an OLED display, which will be an essential tool in your development kit. It also features its sleeping mode and over-heating notification. In addition, it is easy to assemble and ESD safe (through grounding clamp). The temperature range of this iron is 100 ~ 400 ℃(212 ~ 752 ℉), and It contain two integrated(with heater) and compact soldering tips for different circumstances. You can configuration your setting by USB micro type-B interface.[1]
[1]This page only show a quicker way and main information to get started. For detailed information, please refer to the manual included.
![]() |
![]() |
---|---|
For EU Edision | For US Edision |
Features
-
Accurate (temperature stability within ± 2%) temperature-control
-
Slender, lightweight iron, no fatigue for long time working
-
Rapid heating up for high efficiency
-
Separate power adapter to be safer for personal safety
-
Grounding clamp to be ESD-free
-
USB micro type-B interface for customizable system setting and firmware update
-
No manual calibration needed
-
Swtichable temperature unit(℃ or ℉)
Specification
Screen | OLED |
USB interface | USB micro type-B |
Weight | 33g(power adapter not accounted) |
Power | 65W |
Input voltage(for power adapter) | 100 ~ 240 V |
Temperature range | 100 ~ 400 ℃(212 ~ 752 ℉) |
Impedance from tips to ground | 2 Ω |
Temperatures stability | ± 2% |
Sleep mode temperature | 200℃(392℉), adjustable |
Parts list’
Parts list
Parts name | Quantity |
---|---|
Mini Soldering Iron (main part) | 1PC |
PCB soldering kit | 1PC |
Soldering iron tip type-BC2 | 1PC |
Soldering iron tip type-B2 | 1PC |
Soldering iron holder | 1PC |
PCB soldering kit | 1PC |
DC5525 power adapter | 1PC |
Earth clamps | 1PC |
Hex key ( and tow backup screws) | 1PC |
Manual | 1PC |
Getting Started
Note: In this case we show you a general development environmental. This section shows you how to basic operations with this soldering iron. For more details, please refer to manual included in the package.
Exploded view
- ①. Solder iron tip fixing screw
- ②. Button A
- ③. Button B
- ④. Set screw
- ⑤. Power port
- ⑥. Micro USB
- ⑦. DC5525 12-24V port
- ⑧. Solder iron tip connection port
- ⑨. Solder iron connection side
- ⑩. Solder iron heating element
Assemble the soldering iron
-
Unscrew the tip setscrew, insert the solder tip into the connection port, and then tighten screw.
-
Connect the ground wires with the ground set screw.
-
Connect the DC connector to Mini Soldering Iron, plug the power cord and turn on the device accordingly.
Basic operations
Adjust temperature
Press buttons to adjust temperatures.
Press button A to enable temperatures-increasing, press button B to enable temperatures-decreasing.
Calibration
- 1. Press button B in standby mode (no-heating state) to enter thermometer mode.