Bracket for Infrared Proximity Sensor
Introduction
This is an aluminum infrared proximity sensor bracket kit for Infrared Proximity Sensor. With this kit,one RB-421 Servo and one Infrared Proximity Sensor you can build a 2 degrees freedom servo mount assembly. This kit is professional in steering the infrared proxinity sensor on a robot for 180° of rotation side to side and front to back. These parts also have holes at 20mm spacings so they can be attached to Seeed (http://www.seeedstudio.com/depot/starter-bundle-harness-p-906.html?cPath=178_184)Starter Bundle Harness which has 20mm spacings as well.
Application Ideas
- Robot eyes
- IR self controller
Mechanic Dimensions
Usage
Hardware Installation
For holding IR sensors while you can turn it with different angles
Bill of Materials (BOM) /parts list
Devic | Value | Manufacturer | Details(size:mm) |
---|---|---|---|
IR sensor bracket(10034R0) | 1 | ||
angle mounting bracket(10034R0) | 1 | ||
Plastic rivet | 2 | HKWASI | D3x5.5(diameter 3 length 5.5 ,black) |
Plastic rivet | 10 | HKWASI | D2X4.8(diameter 2 length 4.8 ,black) |
selflocking plastic rope | 2 | 2x56 |
Help us make it better
Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!