AVR USB Programmer

Introduction

Features

• Can be used to program most AVR microcontrollers via USB (USBASP compatible. See http://www.fischl.de/usbasp/ for details)
• A general purpose AVR Mega48 board with all I/Os brought to sides of board and holes matching 0.1 inch pitch prototype boards. Execllent for AVR experiments and developments. (Note: 07302 is shipped with ATmega48 on board)
• Can be separately powered by adding two commonly available through-hole components
• Compatible header provided for programming 062 oscilloscopes
• Can be converted to Uart/USB converter by simply reflashing it with AVRCDC firmware (available at http://www.recursion.jp/avrcdc/ ) and adding one resistor

ApplicaHardware Installation

Click here to check the assembly drawing.

Bill of Materials (BOM) /parts list

1. Accessory included:

   • 10-core programming ribbon cable

2. Optional:

   • Mini USB cable

Resources

• How to Use the USB Programmer

• Schematic

• Assembly drawing

• Supporting software (Windows/linux, in English)

• AVR programmer firmware and USB driver

Help us make it better

Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!