3.6V Micro hydro generator
Introduction
Micro hydro power is clean, renewable energy. Here is a G 1/2 micro hydro generator which can supply stably output voltage and output current with the help of one voltage stabilizing circuit and one rechargeable battery. We can install it at home to save household energy, like using spray shower to light LEDs etc.
Pressure and Flow diagram
Flow and Output voltage Diagram
Note
This module has added one voltage stabilizing circuit and one rechargeable battery, output voltage is stably 3.6v and output current is stably 300mA.
Flow and Output voltage Diagram
Specification
| Weight | 165 g |
| Output voltage | 3.6V |
| Battery Capacity | 300mA |
| Maximum working pressure | 1.75 MPa |
| Working pressure | 0~1.75MPa |
| Working temperature | 0~110°C |
| Maximum | 30mins at 110 °C |
| Recommend flow rate range | 1.5~20 l/min(Pressure 0.05-0.2mpa) |
| Installation Method | direction of arrow |
| Material | nylon/glass fiber,Polyformaldehyde |
| Size of the input and output openings | 0.8inch |
Mechanic Dimensions
Usage
Hardware Installation
Help us make it better
Welcome to the new documentation system of Seeed Studio. We have made a lot of progress comparing to the old wiki system and will continue to improve it to make it more user friendly and helpful. The improvement can't be done without your kindly feedback. If you have any suggestions or findings, you are most welcome to submit the amended version as our contributor via Github or give us suggestions in the survey below, it would be more appreciated if you could leave your email so that we can reply to you. Happy Hacking!